View Advertiser Index
|
Posted on 11/9/2007
|
Motors Heads and Powerglide for sale!!
993 heads, .600 lift springs, 2.02/1.6 stainless valves, 3/8 screw in studs w/ guide plates, surfaced and ready to bolt on. $350 obo
GM bowtie heads, 2.05/1.6 stainless valves, .600 lift double springs, 7/16 studs and guide plates, ported, ready to bolt on. $500 obo
353ci short block, 400 block(line honedand decked 9"), 3.25 stroke crank, 6.125 scat rods(floating), JE light weight domed pistons, h bearings, file fit rings,, 7qt pan., 6" light weight dampner, competition balance. $2000 obo
355 short block, wiseco pro tru forged light weight pistons, 6"scatt rods(floating), lightened 350 crank, h bearings, 4 bolt block decked 9", 7qt pan, 6" light weight dampener, competition balance. $1800 obo
Heads available upon request for these 2 motors.
355ci. 6" cat rods, hyper. pistons 4.060. balanced, stock crank cast 3.48 stroke, 2 bold block decked 9", h.v. oil pump. double roller timing chain, custom solid lifter cam, 487 heads, .600 lift springs, 2.02/1.6 stainless valves, 9-1 compression, 2bl. intake cast, +.100 pushrods, hardened 1.5 stamped elgin rockers, 3/8 poly locks w/ screw in studs. $1400 obo
Circle track powerglide, internally valved to use a direct drive coupler or a dummy converter, built by Auto Trans Matic, holds 6 high gear clutches instead of 4 to prevent high gear failure on the track!! $600
Coan 9" light weight dummy converter, has fluid circulation to keep 3.5 quarts of fluid in it. $360
call (402)238-3766 ask for Roger
or e-mailme at [email protected]
Contact Information:
Rob Hobus
Phone: (402)490-3933
Email: [email protected]
|
|
|
|
