View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale/ Wharehouse clean out
350 +080 sp cast piston, 4 bolt block, stock rods, cast crank, hastings rings, Fed Mog bearings, rebuilt just to throw in your old hunting truck or beater.Complete motor ready to drop in $700
KiethBlack hyper pistons, 350 +060,388 dome, for use with 6" rods and 3.480 stroke.$200
412ci pistons, 400 +030, uses 6" rods, and a 3.800 stroke crank $200
Lunati 4340 forged crank, 3.502 indexed stroke, $400
BBC Mullodex Forged Steel Crank, call for details.
Lots of new bearings and rings on hand.
New old stock bearings, call for details,
NEW GIUDE PLASTES $10 a set ( Made in out shop)
NEW BALANCE PLATES, $9 ( Made in our shop )
NEW SEAL-UP STORAGE KITS $25 ( Made in our shop )
We build custom brackets, 1 or how ever many you need, call?
Wharehouse clean out listed below
4.3 liter V-6. long block,5000 miles on rebuild, $500
4.3 liter good used motor. Runs good came out of a 1986 1/2 ton pickup, $350
SBC headers for a 4 wheel drive pickup $20 realy nice shape
BBC headers for a 4x4 $15
Late Model headers, $20 for all(2 sets)
1 Diesel starters, 6.2 excellant shape, $75
3 speed trans, $100
Exhaust manifolds, $3 pr,
2 and 4 barrell intakes,starting at $5
lots of 2 barrell carbs $15
4 barrell q-jet carbs, good shape, $10
Forged steel cranks that need repaired, cheap
Pioneer good used AM/FM/Casset player,$50 guaranteed.
8 bolt wheels, white spoke type, need repainted.$???
Valve Seat Grinder, might need new stones but otherwise complete. $300
There is more in our 4000 foot wharehouse than listed call if your looking for something.
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
