View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale/Mod roller
Mod chassis for sale, basic roller, good straight car for beginner or b-mod. $1500 all the parts I have go with it.
350 4 bolt block, +060, bored but not yet honed, Line bored,clearenced for stroker crank, oil passages drilled and tapped, all the holes have had tread cleaner run through them.good straight deck surface,all the casting slag has been removed for lifter area, will hone to fit your pistons, Nice block $400
400 block, 2 bolt block fresh +040 bore, not yet honed, straight line bore, oil passages drilled and tapped $300
412ci pistons, 400 +030, uses 6" rods and a 3.800 stroke crank. pistons are used but excellant shape. $200
393ci pistons, for 6" rods and a 3.625 stroke. these are actually for a 18 degree motor so the valve reliefs need cut, cant remeber all the specs on the for original use as an 18 degree.. $150
World products heads, SR torguers, 67cc, srewe in studs,stock diameter 600 lift springs, used but good shape, $400
1 Edelbrock Aluminum head, new never used, #6061, set up for 2.02/1.6 valves $300
1 set of 291 casting heads, bone stock, they are rebuilt ready to bolt on $150
Edelbrock Performer intake, good shape, $50
383 balance plates $9 shipped
Guide plates flat type, $10 set
Valve retainers, hardened $10 set
1 set of double springs/ w damper, 1.450 diameter, comes with 10* locks, hardened retainers and bottom spring cups. $75
1 set of Manley 2.055 SS intake valves, 100 long, undercut stem, single grove $50
1 set of Manley SS exhaust valves,1.6, 100 long, undercut stem single grove, $50
New pr. of copper head gaskets, .060 thick $100
Engine seal kits, seals up that motor for storage or transportation, $25
1 2 barrell intake that is cleaned and crack checked, it has been square surfaced, $35
2- 16"X8, white spoke 8 bolt wheels, $25
Turbo 400 tranny, used works good $75
Pull bar brackets, pan hard bar brakets, disc brake brackets, shock tabs, gussets, J bar brackets, all kinds of tabs and other brackets for sale
I have lots of good new and used parts on hand, call if you need something special.
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
