View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
JE 15 degree flat top pistons, 4.151 bore, 1.186 com hght, use a 6" rod and a 3.625 stroke crank for 393ci. $250
Eagle 4340 crank, 3500 stroke, $300
GM steel cranks, 10/10, $100
Short block-- 350 +030, 4 bolt block, TRW forged LW 2 valve relief pistons, gm 5.7 rods polished beams, steel crank,1/16-1/16-3/16 ring package, clevite bearings, your choice of solid flat tappet cam, $1100
350 4 bolt block , bored +060 but not honed yet, line bored , square decked,oil passages drilled, $500 will hone to fit your pistons.
487 casting heads, cleaned and checked, surfaced, new guides. 2.02 int, 1.6 exh, new springs, retainers and locks, bronz guides, pinned studs,$500
882 castings, surfaced, cut for 2.05 int and 1.6 exh. cut for screw in studs and guide plates,bronz guides,hardened seats no port work $200
Engine seal kits,, Seals motors to keep them clean, includes, exhaust,feul pump,water pump, thermostat,distributor hole and intake plate (which is also a lift plate) just let us know what motor. $25
Balance plates for externally balancing 383&406 engines using small flex plates,Made here in the usa in our shop. $9 shipped
New Guide Plates, (flat) $10 a set shipped
New 7/16 screw in studs, $10 set
New ARP cam lock bolts, $5 pkg
New JE wrist pins, part #927-2.750-15-51S, 130 grams, $100
New Diamond wrist pins,927-2.850 tappered ends,140 grams$75
583 center section, 31 or 28 spline, $225
exhaust manifolds,, $5 pair
tubo 400 trans, $100
--Other Items For Sale--
Tubing protractors- $125
gussets, shock tabs, brake caliper brackets,torque link brakets, almost any type of brakets you need, call and let us know what you need, complete metal fabrication shop
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
