View Advertiser Index
|
Posted on 11/7/2014 8:19:01 AM
|
Parts/Misc
350 +060 4 bolt short block (no cam) mahle pistons Scat rods Gm fresh ground crank block is decked bored and honed with plates line bored file fit rings acl bearings fully balanced $1800 Can make it complete
350 +060 4 bolt short block Mahle pistons Scat rods Gm crank bored and honed with plates line bored file fit rings Acl bearings fully balanced new cam shaft cloyes timing chain oil pump oil pan $2800 can make complete
350 block 4 bolt line bored square decked ( std bore will bore and hone to your pistons) oil passages drilled and tapped $600
350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded cam bearings installed oil passages drilled and tapped $350
400 block +030 decked cleaned and checked and decked $300
391 ci (400 +010) domed pistons for use with 6" rods and a 3.625 stroke crank like new $300
New pro comp 6" stock type bushed cap screw $125
Eagle 6" press fit recond $100
383-- 4340 gun drilled and lightned crank fresh grind
( checked for straightness and magged) $400
441 heads 2.02 int 1.6 exh slight port work bare $200
882 heads 1.94/1.5 fresh valve job new intake valves complete $150
Misc
100 lb propane tank converted to air tank $35
1 set super trapp mufflers $100
(1) 100 lb regular propane tank $75
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
