View Advertiser Index
Posted on 8/21/2014 8:17:37 AM
|
Parts For Sale
(2)350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded $350
(2)350 +060 4 bolt block bored and honed W/plates line bored square decked oil passages drilled and tapped thread holes cleaned cam bearings $550
(1)350 +040 4 bolt block line bored square decked 9.000 bored and honed with torgue plates has ARP main studs oil passages drilled and tapped coated cam bearings $750
400 block +030 decked cleaned and checked $300
400 +040 block 2 bolt 8.895 deck hieght
360 balanced rotating assembly Mahle pistons, Scat rods, GM crank ACL bearings Moly rings $1200
JE 390ci small block chevy domed pistons $300 KB #114 350 +060 domed hyper pistons $200 NEW 350 +060 silvolite cast pistons $60
New pro comp 6" stock type bushed cap screw $125 Eagle 6" press fit recond $100 GM reconditioned stock rods $100
383-- 4340 gun drilled and lightned crank fresh grind ( checked for straightness and magged) $400
NEW EQ 350I heads in the box $290 each
441 heads 2.02 int 1.6 exh slight port work bare $200 882 heads 1.94/1.5 fresh valve job complete $150
New Valves (singles and sets) Lots of good used valves (singles and sets)
several good used oil pans (Kevkos and cheap claimers) good used rods (magged checked for straightness reconditioned as needed
good used pistons sets and partials
Contact Information:
Terry Cohoon Phone: (712)449-5543 Email: modified@mtcnet.net
|
|
|
|