View Advertiser Index
|
Posted on 5/13/2014 8:23:57 AM
|
Parts
350 +030 2 bolt studded block speed pro hyper pistons, recond GM rods w/milodon bolts cast crank $600 for short block
400 block +040 2 bolt main 8.985 deck hieght $200
350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded $350
350 +060 4 bolt block line bored square decked bored and honed with plates $550
350 +040 4 bolt block has all 5 billet main caps (not splayed) ARP main studs line bored square decked bored and honed with plates nice centered cam bore 9.005 deck hieght $1000 comes with head studs
360 ci balanced rotating assembly Mahle pistons and rings, 6" Scat rods,Gm reground crank ACL bearings $1300
JE 390ci small block chevy domed pistons $300
Ross 390ci small block chevy flat top $400
KB #114 350 +060 hyp $200
NEW 350 +060 silvolite cast pistons $60
New pro comp 6" stock type bushed cap screw $125
Eagle 6"H-beam rods used $100
Eagle 6" press fit recond $100
NEW EQ heads bare $290 each
NEW Scorpion Roller rockers spc1000
$235
487 heads 2.02 int 1.6 exh hardened exh seats surfaced bare $300
441 heads 2.02 int 1.6 exh slight port work bare $200
882 heads 1.94/1.5 fresh valve job complete $150
NEW Bullet cam 239/239 507/507 hydr. $140
NEW Rhoads lifters 8178x (anti pump up) $125
New springs for cam above $60
Above 3 items for $275
#8 cam and lifters $50
125# lead in 25# increments $1.25 lb or $1.00 lb if you take it all
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
