 View Advertiser Index
|
Posted on 3/23/2012 10:11:46 AM
|
Parts
350+060 splayed cap block, 9.10 deck hieght, line bored, cam bores has been redone, stroker clearenced. oil passages drilled and tapped, beburred. $650 I can complete the short block with the following balanced rotating assembly Icon Forged domed pistons,PRO style 4340 forged I beam 6" rods, 4340 gun drilled and lightened (3.750)stroke crank, clevite H bearings,zero gap molly rings, double roller chain, custom ground cam shaft melling pump, diamond stripper 7 quart oil pan. $3000
400 2 bolt block, fresh line bore, square decked 9.00. virgin block that will clean at +010, main studs $400
350 4 bolt block. Line bored, square decked. .040 $350 or hone to fit your pistons for $400
350 +060 4 bolt block, line bored, bored and honed, decked, $400
World products 72cc heads new in the box. 2.02 intake, 1.6 exhaust. $550
JE 391 CI Domed pistons, 4.135 bore(for use with a 6" rod and a 3.625 stroke crank) $275
Mixed set of 412 ci flat top pistons, same weight and compression heigth. 400 +030 use a 3.800 stroke crank and a 6" rod. 11 pistons total part of them are Lunati and the rest are Ross Good way to build cheap backup. $100 or best offer
TRW forged flat top pistons, 350 +030, for a 5.7 rod, $50
New 383ci (350 +030) dished pistons, speed pro hyper. $150
Contact Information:
Terry Cohoon Phone: 712-449-5543 Email: [email protected]
|
|
|
|