View Advertiser Index
|
Posted on 3/19/2012 7:55:04 PM
|
383 - $3950.00
Complete 383 c.i. � Intake to oil pan
$3950.00 or o.b.o.
Will run on engine stand with gauges prior to purchase if requested.
�All refreshed (New Brgs, Rings, Oil Pump, Head/Valve Job)
�13.0:1 +/- Compression (w/ 49/50 cc heads) Fully Balanced...
�Heads: Iron Eagle; 49 cc; 180 cc runners
Completely gone through
Screw-in-Rocker Studs (3/8�)
Comp Cam Roller-tip Rockers (1.6)
Poly-Lock �Cool Nuts�
Valves: 2.02 / 1.6
3 angle Valve Job
In/Ex Ports match ported
ARP Head Bolts
�Pistons
Wiseco Forged (K261A35) (0.035)
13.0:1 � 49-50cc
Flat Top � Two Valve Relief
6.0 Rod
Floated wrist pin
Apprx wt w/ pin: 337 grams
�Cam (Custom Cams Inc.)
Small Base
Gross Lift: In � .543; Ex - .543
Dur @ .050: In � 254; Ex � 254
Lob Sep: 108 Deg
�Lifters: (Custom Cams Inc.)
Solid Lifter w/ Oiling Hole
�Rods (Scat ICR6000)
4340 I Beam 6.00� Bushed
Light weight
ARP Wave-Loc Rod Bolts
�Crank: Eagle Cast-Steel crank
�Misc:
New Stewart Warner Stage 3 Alum Water Pump; Short; high flow; 3/4� Brg; 5/8� Shaft
Alum DBL groove pulleys
Cast OE 4 bbl Quadra jet intake (Gutted Out)
7 qt oil pan w/ reusable gasket
New Melling 55HV oil pump
Cloyes double roller timing chain
PMB (PB1012-ST) 6 1/4� Dia Harmonic Balancer
�Not Included: Carburetor, Starter, Fuel Pump, Distributer, Exhaust, etc.
Contact Information:
Shawn
Phone: (402)469-6797
Email: [email protected]
|
|
|
|
