 View Advertiser Index
|
Posted on 3/18/2010 7:43:25 PM
|
Hobby Parts, Gauges, Drive Line, SCS CAGE, MISC.
6-10 Rims 5x4.75 some with tires, varrying conditions, some still like new. $20-$50 a piece
3 Speed Tranny With, hydraulic throwout bearing or imca legal slave cylinder, and hanging clutch pedal with hydraulic resivor. $200
Ace Racing Clutch and Racing Disc w/ fly wheel IMCA hobby legal, lighter than stock $150
1 882 stock head 1 993 stock head, $75 for the pair
Steel Battery Box $20
3 Spindles, 8 lower A-arms, 3 Upper A-arms, 2 rear control arms $175 for it all or will sell speratly
3 drive shafts, 2 are professionally built and balanced. $75 a piece
4 Exhaust manifolds, 2 with bars 2 with no bars, $50 for all 4
Steering Setup: steering box, centerlink, tire rods, idler arm, stock power steering set up with brackets, $150
08 SCS Cage and frame. Car had 10 nights on it before it was rolled. Needs new rear clip, Has potential if you have the time. Solid Car $300 obo
Longacre 3 Gauge panel with single switch & push button starter. 10 nights on it since new. Still looks new. has oil pressure, water temp, fuel pressure. $120 obo
Autometer 5" tach with recal. Still like new. $100 obo
SBC mini starter with multi bolt style for big or small flywheels. Good starter $60
Hobby Stock Springs, 5x11 rears 5x11 & 5x12 fronts $30 per spring, most are still new or have very few nights on them.
Call or email for details
Contact Information:
Kenneth Hansen Phone: (712)304-2050 Email: [email protected]
|
|
|
|