View Advertiser Index
|
Posted on 11/18/2008 8:09:08 PM
|
Hobby Stock Engine and Parts for SALE...MUST GO!!
-SBC 355 was freshened 10 nights ago, has stock crank and rods, 993 heads with polylocks (10 nights since valve job and springs), crower cam, 7qt kickout pan. Engine runs strong..includes aluminum water pump, pulleys, balancer, flywheel, clutch, pressure plate, exhaust manifolds, distributor, wires, Big 2brl carb, air cleaner, power steering pump. Can hear run, this is ready to drop in complete air cleaner to pan, pulleys to pressure plate. $2200/offer
- I have 2 313 2 barrel intakes, these are the good ones - $75 a piece
- US Brake Metric Light rotors need turned and bearings - $50 for both, over $100 new
- Used nose piece and tail piece $25 a piece
- Driveshaft for Hobby stock 3 nights since U-joints and balance, $75
- Hardened Axle, Superior brand, just had brand new bearing put on by SCS has not been used since - $175/offer...these are over $250 new
- 487 head bare 2.02 and 1.6, needs work $30
- 487 head bare 1.94 and 1.5, needs work $30
- 2 Steel Monte Carlo rear bumpers - $20 a piece
- 1 Steel Cutlass front bumper - $20
- 26x19 Howe Radiator with shroud, used 2 seasons, holds pressure - $90
- Brand new MOOG inner and outer tie rods and adjusting sleeves for Metric car, over $100 from parts store - $80
- Pair of Metric lower control arms stock - $50 for pair
- Pair of Metric upper control arms stock - $35 for pair
More parts will be added later....if you need hobby parts, I have almost everything
Call or email - leave message if no answer
Contact Information:
Kenny Humpal
Phone: (402)350-2231
Email: [email protected]
|
|
|
|
