View Advertiser Index
|
Posted on 11/9/2007
|
Jet Phantom Stock Car W/ lots Of Extras!!
1) Jet Phantom stock car. I personally have not raced the car. I ran out of time and money. On the front cross member, there is �Jet 02� welded into it. There was rear frame rail damage to this car at some point, but seemed to all be behind rear differential. Frame rail has since been replaced. Everything else seems to be in original condition, except for the normal body dents.
$3,700.00 OBO FOR EVERYTHING LISTED!!!
The car is located in Omaha if you would like to take a look at it. Just let me know and we can set up a time.
I can email you as many pictures as you want.
The following items are included;
1)Q-jet carb built by Kenyon Carburetors.
7) 5.7� Eagle Sir Rods with Speed Pro hyper. Pistons attached.
1) Mini high torque starter.
2) M/T Aluminum Valve Covers with Aluminum breathers built on.
2) Schoenfeld headers. 1-5/8 to 1-3/4 step with 3 �� collector and crankcase evacuation ports installed.
2) 3 1/2" race mufflers.
1) Standard Fan Spacer.
1) Aluminum fan spacer with flush mount. (remove fan without removing water pump pulley or spacer).
1) Hurst 3 speed Saginaw shifter (handle is broken).
1) Pro/Street Balancer.
2) Stock balancers.
2) Tall valve covers.
2) Mid height valve covers.
1) 14� Aluminum air cleaner housing (top, bottom, and o-ring adapter).
1) Edelbrock 14� Chrome air cleaner housing.
1) 14� Outerwears pre-filer.
3) K&N style valve cover breathers.
2) K&N 14� air cleaners.
1) Holley fuel pump with all fittings. 12-327-11.
1) Adjustable Holley fuel pressure regulator.
1) 7� Bilstein shock 40-40
1) 7� Bilstein shock 30-50
1) 7� Afco shock 1277FB
1) 7� Afco shock 1276FB
1) Accell billet Aluminum HEI distributor with MSD module, coil,
cap, rotor.
1) Set of Accell 8.8 Race Spark Plug Wires.
1) LUK 10.5� clutch set (pressure plate and clutch disk).
1) Lightweight 10.5� flywheel.
1) Blow proof bellhousing with motor plate.
1) Howard Stewart aluminum water pump
1) Speedway aluminum water pump.
1) 17� aluminum radiator fan.
1) Oil pressure and Coolant temp gauge on panel with warning lights (oil pressure
gauge is liquid filled Autometer Pro-Comp)
1) High flow fuel funnel with replaceable, cleanable filter.
1) 3-speed aluminum shifter handles with aluminum rods and brackets. Rod ends included.
1) Profile power steering system. Complete with pump, reservoir, hoses
And fittings.
1) Willwood cable style brake adjuster.
1) Willwood 2- pedal 3- master cylinder pedal assembly with cylinders.
1) Willwood pull type slave cylinder.
2) Stock HEI distributors..
1) Aluminum stagger stick.
3) Sets of Fel-Pro Intake gasket sets.
1) Set of Z28 valve springs.
1) Set of PVS Moly Rocker arms. 1.5-1 ratio with 3/8� studs.
1) New set of Speed Pro Hypo pistons. 6.0� rod 0.040 bore (Chevy 350) with new set of Speed Pro Rings
1) Set of Comp. push rods.
1) Set of ford 9� gears 5.83 ratio
1) Saginaw 3 speed. Replaced all bearings and ran 1 year.
1) Stock Saginaw 3 speed I had as a back-up. Don�t know internal condition.
2) Stock intakes.
1) Set of 186 double hump heads. 1.6 exhaust, 2.02 intake. Bowl work. Cut for large springs. Complete with guide plates, valves, and springs.
1) Set of stock 882 heads
1) Set of 462 double hump heads. 1 head needs repaired (broken valve and chamber damage).
4) Stock cranks
1) Set of 186 double hump heads. Had re-done and have never ran them because 1 head needs repaired due to machine shop cutting into the water jacket when cutting them out for larger valve springs.
20) Lead weights probably averaging 20lbs ea. About 400lbs total�???
1) Aluminum 15� steering wheel
1) Aluminum Kirkey seat with cover (gray).
1) 5� tach with recall
1) Set of stock 487X heads. Need worked.
1) Questionable block. I never ran. Don�t know bore or condition.
1)Set of Howards Cams valve springs #98213
1) Set of Comp Cams valve springs (dual spring)
1) Set of guide plates
1) Bundle of valve spring shims
1) Set of Comp Cams valve spring retainers
1) Set of 2.02 & 1.6 Manley valves
1) 22 gallon fuel cell
1)2000 lbs. engine stand
Misc. valve train parts
Simpson racing shoes
Brandon 402-616-7733
Contact Information:
Brandon Hassler
Phone: (402)616-7733
Email: [email protected]
|
|
|
|
