View Advertiser Index
|
Posted on 11/9/2007
|
Hobby Stock Parts For Sale, Rearends, 305, ect.
305 c.i. motor out of 90 chevy truck. it was a crate replacement motor didnt have very many miles on it before it was went through and installed new shim head gaskets,and entire gasket kit and seals in motor as well as a high performance big lift hydralic cam. Cam and lifters already been broke in on run stand.Ready to drop in and go! need to get rid of takes up to much shop space. $500 or make a reasonable offer.
SCS IMCA Hobby Stock Ford 9" rearend with all metric Mounts
new custom spring cups to fit large diameter pig tail springs. like new bushings.60" rearend. fabricated with 4 deg. pinion angle. $300
29 3/4 inch 9" 28 spline superior axles $175/axle
29 3/4 inch 9" 28 spline Sway-Way Axle $125
2- ford 9" housings with gm metric mounts...both 60".. one is bent but could be re-done/jigged and the other needs checked for straightness, was straight when it came out of car. $75 for bent one, $200 for better one.
175#, 200#, 225#, 250# 12" single pigtail Rear springs for imca hobby. all have very little nights on them. $30 a piece.
16 gal. fuel cell in 1/4" steel can. good fuel cell for open hobby class with no ballast rule, enduro car, or someone just starting out. very heavy, adds good rear %. $100
recondition GM 5.7 rods brand new, $100
16" Kirkey Light Weight ALuminum Racing Seat $200
located in SouthWest,Iowa
any questions? feel free to ask. thanks.
will consider trades for 78-86 Cutlass, Monte, or Regal
Contact Information:
kenny hansen
Phone: (712)563-9933 or (712)304-2050
Email: [email protected]
|
|
|
|
