View Advertiser Index
|
Posted on 11/9/2007
|
lots of motor parts
650 dp needs kit been sitting a long time. $100.00
750 dp needs kit been sitting a long time. $100.00
(3310 with link kit and dp rear metering block added)
k\n filter 4x14 $15.00
993 hobby head single $50
997 hobby single head $50
441 single hobby head stock $50.00
weind 7546 high rise alum intake. $100.00
Double hump cores crack checked stock. $175.00 set
Bare Eq 49cc\200cc angle plug. one head needs a intake seat, my shop said its fixable. $350 pair.
Dart Iron Eagle 215s,64cc, angle plug, 8 nights all brand new!! set up for flat tappet cam by Dalys in omaha. ss valves etc. 2.05/1.6 3\8 or 7\16 studs your choice. $700.00 complete, $400 bare.
pro action 200cc 64cc angle plug Complete good parts 27 nights. $600.00. BARE. $400.00
pro action same as above blew cast piston motor up, some pieces in a few valves stuck open, No seat damage at all. $500 complete. BARE. $400.00
355 (7) wiseco pro tru dome pistons, 12-1, for 6" rod, 4.00 bore. 100.00
383 (7) wiseco pro tru dome pistons, 13-1, for 6" rod,4.00 bore. 100.00
383 keith black 12-1. .100 dome pistons with childs albert dura moly file fit rings. 18 laps. mounted on polished gm x rods with arp bolts. balanced up set with balance card so you can balance your crank to match!! every thing in great shape and ready to run! $225.00 All 8 complete.
406 pistons rods, (7) kb claimer series ft pistons 4.155,3.75 with rings and renegade 5140 5.7 rods. balanced set. 1.5 nights. $75.00
406ci. pistons rods. 8 keith black hyper, .100 dome pistons,stock 5.7 rods. 4.155 balanced set. 10 nights. $100.00
350 crank, scat 3.48 cast steel crank. std std $45.00
350 Steel crank, 4340 steel 3.48 crank std std. Crankshaft Specialties. $250.00
350 .030 block, one night. lost main brgs, needs line hone and a few new caps. I have a full set of caps. zero decked, bored, honed with torque plate etc. $100.00
sportmod or hobby intakes. Gm #250 best cast iron intake available. very clean castings inside. q jet. $75 each
IMCA stock car intakes, plenums milled #250 same as above. $100 each
new tin tall valve covers $10.00
7\16 stud roller rockers, 8-1.5, 8-1.6 crane and harland sharp with locks $100.00
EMAIL [email protected]
Some pics posted at www.jnjfab.com in the for sale section.
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
