View Advertiser Index
|
Posted on 11/9/2007
|
misc. for sale
Tilton reverse mount set-up
Bell housing
Reverse Mount Starter
hyd. throw out bearing
Small Fly Wheel
5.5 2 disc 1 1/8 10 spline clutch
not open on top for pump
this set up would cost almost $1800 new
--First $350 ca$h takes it--
1-set DART steel 200cc runner 49cc 2.055/1.6
fresh out of machine shop
cracked checked
milled
small vavle springs all were checked if bad had new ones
were put in
vavles were checked had one bent and replaced
NEW 3/8 screw in shouldered studs
-- $700 ca$h takes them--
1-set DART steel 215cc runner 64cc 2.055/1.6
ferrea competion plus valves
competition cams valve springs FOR ROLLER CAM
strait plug
comp roller cam
bronze gear for cam
comp roller lifters
comp .200 over pushrods
crower 1.5 roller rockers
stud girdle
polylocks
aluminum elelbrock intake
--all were on a 550hp 377 -- 25 nights since new
$1550 ca$h takes all of it or will seperate
1-set 3/8 Elgin roller tip rocker arm
1-set 7/16 Elgin roller tip rocker arm
no polylocks or l/nuts just balls go with
nothing wrong with any of them just switched to comps
-- $100 takes both sets --
serious inquires only
Contact Information:
Tim Bengard
Phone: (712)268-2745
Email: [email protected]
|
|
|
|
