View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
401 ci sbc motor. Std bore+.002, JE forged domed pistons, eagle 6" rods, Scat lightenen crank, moly file fit rings, clevite bearings, internaly balanced, small 6" balancer, this motor has 6 night on it, $1800 for the short block,
Rebuilt 350, 1988-1992,came out of a 1992 Suburban, new cast pistons,rings,bearings,oil pump, polished crank,new timing chain, completely redone heads, Has throttle body intake on it.It also comes with Distributor, flywheel, waterpump, all the sensors, and a starter $600
350 +060 4 bolt block, bored but not honed, line honed, oil passages drilled and tapped, all bolt holes cleaned, $350
KiethBlack hyper pistons, 350 +060,388 dome, for use with 6" rods and 3.480 stroke.$200
412ci pistons, 400 +030, uses 6" rods, and a 3.800 stroke crank $200
Lunati 4340 steel crank, std weight, 3.502 indexed stroke, $400
BRC 4340 steel crank, 3.625 stroke, $200
double hump heads, ready to bolt on $300
487 heads , some may be x heads, these are cores $75 a pair.
186 heads, some light port work ,cleaned and crack checked, bare $100
882 heads cleaned and crack checked $75
NEW FLYWHEELS, $20
NEW GIUDE PLASTES $10 a set
NEW BALANCE PLATES, $9
NEW SEAL-UP STORAGE KITS $25
turbo 400 trans $75
sbc headers for a 4 wheel drive pickup $25
8.5 posi carrier, $100
aluminium water pumps,$35,$50
lots of 2 and 4 barrell intakes, $25
assortment of used valve covers,, tall and short, steel and aluminum, $10-$25
assortment of used odds and ends pistons, $5 and up
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
