View Advertiser Index
|
Posted on 11/9/2007
|
Parts / Motors For Sale
401 ci sbc motor. Std bore+, JE forged domed pistons, eagle 6" rods, Scat lightenen crank, moly file fit rings, clevite bearings, internaly balanced, small 6" balancer, 186 casting heads, screw in studs, ECT,ECT. this motor has 6 night on it, $2200 for the long block or $1800 for the short block,
355ci short block,speed pro pistons, gm rods, cast crank, $900
355ci short block, speed pro pistons, scat rods, steel crank, balanced, comp cam, melling pump, $1500
(SOLD)358ci short block, 4 bolt block, Wiseco lite weight flat top forged pistons,SCAT 6" 4340 stock appearing rods,, 3.500 stroke crower steel crank,total seal rings, clevite bearings, melling pump, champ pan, house grind cam shaft. $2500 firm.(SOLD)
350 chevy motor, just pulled out of a pickup.Runs good, performer intake, quadrajet carb,starter, this is complete. $350
4.3 V-6, long block, 500 miles on rebuild, hydraulic roller cam, $ 500
350 4 bolt block, +060, bored but not yet honed, Line bored,clearenced for stroker crank, all the holes have had tread cleaner run through them.good straight deck surface,all the casting slag has been removed for lifter area, Nice block $300
400 block, 2 bolt block fresh +040 bore, not yet honed, straight line bore, oil passages drilled and tapped $300
4412 Holley carb,Has 6 hrs total time on it, stock has not been modified in any way. $200 firm.
1 set of 291 casting heads, bone stock, they are rebuilt ready to bolt on $150
882 casting heads, cleaned and crack checked, new guides $100 pr.
Still have head cores for sale.???????????? call for your needs.
Edelbrock Performer intake, good shape, $50
2 barrell intake cores,$10
Engine seal kits, seals up that motor for storage or transportation, $25
383 balance plates $9 shipped
Guide plates flat type, $8 set
****( I have about 10 sets of these left)NEW Comp Cams and Crane Cams hardened black oxide retainers these are stock diameter, $20 a set while supplies last.
New pr. of copper head gaskets, .060 thick $50
Pull bar brackets, pan hard bar brakets, disc brake brackets, shock tabs, gussets, J bar brackets, all kinds of tabs and other brackets for sale
I have lots of good new and used parts on hand, call if you need something special.
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
