View Advertiser Index
|
Posted on 11/9/2007
|
Entire Racing operation for sale!!!!!
Entire Racing operation for sale!!!!!
2002 Terminator Chassis updated to a Stock car in 2005.
I originally built the car as a hobby stock and raced it as such for 3 years. I then took the car back to Terminator Chassis and had the weight jack, and shock mounts put on in 2005. The car was one of the underslung cars and I still have the underslung bars and they will go with and can be welded back on. 2002 was the first year of the bolt-on front end and bolt-on passenger door bar. The only bar that has ever been replaced is the passenger bolt-on door bar, and the car has never had a serious wreck or been bent at all. I have taken excellent care of this car, and it has always been maintained. It will have approx. 100 shows on it by the end of this season, which some guys have in a year or two. It has an 84� Cutlass body with an old style Monte SS tail piece, and a 2005 style Monte SS nose piece. Let me know how you would like the car, as I will sell it in almost any configuration.
It has a Kirkey Intermediate seat, Simpson Platinum CAMLOCK belts(new this spring $240.), Autometer ultra light gauges wt, op, 5� tach w/recall, brake gauges, switches. Dry cell battery w/disconnect switch. If you want it �Turn Key� with the motor, powerglide, and 5.83 or 6.20 gear� Get in and go Racing�. $9000.
As a roller�. $5000. All you need is motor, tranny, gear and you�re racing.
Another option is buy the car with these items left on it� The car/cage with the floater, front suspension, pedals, gauges, seat, fuel cell, fuel lines, battery cables, midplate, shifter and linkage, driveshaft, radiator, power steering, steering shaft, quik steer, and steering wheel�. $3900
Below is a list of the parts that were new as of 2005
Winters Floater rear end, Front Rotors/bearings, IMCA Tubular upper control arms/ball joints, Front �swivler� weight jacks, Rear weight jacks, New metal firewall as per IMCA rules, cowl style dash with trap doors and bead-rolled flames, Afco Radiator/Shrouds, 16 Gal fuel cell, AN style Fuel filter, Springs, Shocks, Aluminum mid plate, powerglide shifter/linkage, Wilwood brake pedals/master cylinders, all metal brake lines, Brake Gauges/adjuster, Howe Quiksteer, Block mount steering pump w/remote reservoir and lines Tubular front bumper, window net, all wiring.
JR Motorsports 383 c.i Complete- Scat crank/rods, dome pistons, World Products heads, JR cam, Complete pan to intake. $2200.
2 Powerglide Racing Tranny's- Built by Autotransmatic-Roger Hadan- One complete with coupler and lines/ball valve. $475. The other one is Fresh(Still sitting at the tranny shop) $375. $800. for the both with all parts
Bushore 2 1/2" drive shaft for stock car $125.
JR Motorsports 383c.i. Short Block- Motor blew- two junk rods/pistons, crank is bad, and block is junk. Salvage 6 rods and 6 pistons, Huggins Cam and lifters, and lifter valley tray. $300.
Double Hump Heads- 461 castings Some porting work, Needs Valve job and new springs. Good not cracked $250
6.20 Gears- full spool 28 spline w/case $325
5.83 LW Gears- full spool 28 spline w/case $325
$600 for both sets
3- Aero 5x5 4" off Beadlocks silver with good Hoosier IMCA tires $95. each
6-Aero 5x5 2" off silver with good Hoosier IMCA tires $50. each
All tires and wheels for $550
JR Motorsports 2bbl Intake cut out for a stock car, with phenolic adapter for holley $80.
Holley 350 cfm IMCA carb- Keith Dorton works good. $250.
Flow Design adapter- Great adapter for IMCA Stock $65.
Steel Valve covers- with tubes welded. $10.
Bilstein 9in shock. 40/10 top mount weld cracked but shock is straight and still works-repairable $50.
Shop Tools>>>>>>>>>>>>>>>>>>>
Intercomp Scales- EZ Weigh Scales are in EXCELLENT shape and work perfectly. They have been used a total of 12 times and are the HD BILLET aluminum scale pads and not the CAST aluminum pads like most are. One button unit switches display. I have wood blocks to roll the car on and off with. $900. you won't find better scales.
Polished Aluminum Stagger Guage $25.
Bead Breaker- used one season. $25.
Glow in the dark Air pressure guage w/ bleader $15.
Longacre Caster Camber Guage w/ magnetic adapter used three times $100.
Coleman 4200 watt Generator. This has been started three times. Once at the track last fall, once this summer to make sure it worked when I bought it, and One night I let it run for 2 hrs to run it out of fuel. $350. New last fall was $495
40 Gals of Citgo Red 110 octane race fuel. $165. or $185 if you want the barrel. I get $20 for returning the barrel when I'm finished.
Thats 4.21 a gal which is exactly what I paid. beats the $6.00 track fuel!!!
Tow Rig>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
1988 Chevy 3500 Crew Cab Dually. Nice truck with a custom interior w /buckets console in front and bench in back, aftermarket Guages, CD/MP3 Player. The motor runs good and it tows great. Transmission was rebuilt in May 2006 by Autotransmatic. 454 with a turbo 400, New tires on front, could use some in the rear. New radiator, a/c works, Just tuned up this spring. Nice truck not all rusted out like the rest of the around here. $3800.
BUY THE WHOLE WORKS.....TRUCK, CAR, AND ALL TOOLS/PARTS/EQUIPMENT FOR $13,200.
Give me a call if you have any questions, Thanks, Tom
Home # (402) 727-5749
Cell # (402) 719-4276
Contact Information:
Tom Clapper
Phone: (402)727-5749 (402)719-4276
Email: [email protected]
|
|
|
|
