View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
350 block +060, 4 bolt $75
350 block +060, 2 bolt $50
400 block std bore $200
350 block, +040 fresh bore, 4 bolt, clearenced for a 383 stroke crank,line honed, oil passages drilled and tapped, $400
350 +060, 4 bolt block, line bored, square decked, oil passages drilled and tapped for screw in plugs, bored but not yet honed, $600
400 block, fresh +040 bore, not yet honed, straight line bore, $300
393 sbc pistons 18 or 23 degree JE ,uses 6" rods/3.625 stroke $200
412 sbc pistons, Ross forged flat top pistons, uses 6" rods and 3.800 stroke $250
Several other partial sets of pistons, call or email if your looking for something special
3.800 stroke crank, gm crank that has been offset ground, $50
Edelbrock Performer intake, good shape, $50
Edelbrock Performer RPM intake, excellant shape $75
383 balance plates $9 shipped
Guide plates flat type, $10 set
Valve retainers, hardened $10 set
1 set of double springs/ w damper, 1.450 diameter, for big flat tappet cam, comes with 10* locks, hardened retainers and bottom spring cups. $100
1 set of 2.055 SS intake valves, 100 long, undercut stem, single grove $50
1 set of SS exhaust valves,1.6, 100 long, undercut stem
single grove, $50
New pr. of copper head gaskets, .060 thick $100
Engine seal kits, seals up that motor for storage or transportation, $25
500 ring and pinion gear set $75
New set of tall alluminuim valve covers/w breathers, had crack in them when opened, beern repaired $25
New set of short alluminum valve covers, $20
1 2 barrell intake that is cleaned and crack checked, it has been square surfaced, $35
2- 16"X8, white spoke 8 bolt wheels, $25
Turbo 400 tranny, used works good $75
2 sets of late model headers, $20
Pull bar brackets, pan hard bar brakets, disc brake brackets, shock tabs, gussets, J bar brackets, all kinds of tabs and other brackets for sale
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
