View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
355 CI. short block, 4 bolt block, TRW forged flat top pistons, GM rods 5.7 with polished beams and hardened bolts, GM cast crank std/ mains and rods. $600
393 sbc pistons 18 or 23 degree JE ,uses 6" rods/3.625 stroke $250
412 sbc pistons, Ross forged flat top pistons, uses 6" rods and 3.800 stroke $250
Several other partial sets of pistons, call or email if your looking for something special
3.800 stroke crank, gm crank that has been offset ground, $75
383 balance plates $9 shipped
Guide plates flat type, $10 set
Valve retainers, hardened $10 set
1 set of double springs/ w damper, 1.450 diameter, for big flat tappet cam, comes with 10* locks, hardened retainers and bottom spring cups. $100
1 set of 2.055 intake valves, stock length, $35
(5)2.055 intake valves, 100 long, $20
New pr. of copper head gaskets, .060 thick $100
Engine seal kits, seals up that motor for storage or transportation, $25
modified headers,, found one last set in the shed, 90* descent shape $25
2 sets of Howe late model headers, not sure what they fit, sell them for $30 a set or $50 for both pr.
500 ring and pinion gear set $75
Turbo 400 tranny, used works good $100
New set of tall alluminuim valve covers/w breathers, had crack in them when opened, been repaired $25
New set of short alluminum valve covers, $20
2 barrell intake that is cleaned and crack checked, it has been square surfaced, $50
severasl 2 barrell intakes, $10
2- 16"X8, white spoke 8 bolt wheels, $20
Pull bar brackets, pan hard bar brakets, disc brake brackets, shock tabs, gussets, J bar brackets, all kinds of tabs and other brackets for sale
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
