View Advertiser Index
|
Posted on 11/9/2007
|
Parts and Motors For Sale
355 CI. short block, 4 bolt block, TRW forged flat top pistons, GM rods 5.7 with polished beams and hardened bolts, GM cast crank std/.001 mains and rods, flat tappet solid cam, you choice of pans, (kick out or stock type claimer). freshened up ready to go. new oil pump, cloyes chain. $1200
385 CI short block or complete motor, speed pro pistons, eagle rods, scat crank, solid cam, internaly balanced, clevite bearings, melling oil pump, cloyes chain. $1500 short block/ $1800 complete
390 ci short block, flat top hyperutectic pistons, gm rods, cast crank, (stock car motor only) call for the details
393 sbc pistons 18 or 23 degree JE ,uses 6" rods/3.625 stroke $250
412 sbc pistons, Ross forged flat top pistons, uses 6" rods and 3.800 stroke $250
352ci pistons partial set, domed, uses 6" rods and a 3.250 stroke crank,$25 there are 6 of them.
3.625 stroke crank, 4340 brc, one rod journal has been repaired $250
3.800 stroke crank, gm crank that has been offset ground, $125
350 ci block, 4 bolt block, cleaned and crack checked, line bored, bored but not honed yet, squared decked 90* of the crank, oil passages drilled, and tapped, all threaded holes cleaned and deburred, has real good centered cam bore, $600 and will hone to fit your pistons.
gm resized rods $110
383 balance plates $9 shipped
guide plates flat type, $10 set
Valve retainers, hardened $10 set
Engine seal kits, seals up that motor for storage or transportation, $25
exhaust manifolds $5 pr.
modified headers 4 sets to choose from $40
Flywheels $5 used, new $20 not many left
500 ring and pinion gear set $100
metal storage cabinets, $10
I have a $1 and $5 grab box in the shop, lots of good stuff in it just want to move it. some stuff you wont believe. bearings, rings, valves, cams, cranks, timing chains, suspention parts, brackets,ect,ect,ect, bet it dont last long..
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
