View Advertiser Index
|
Posted on 11/9/2007
|
Ford Thunderbird stock car
1988 thunderbird body that was made to fit on a shortened ltd frame according to IMCA rules. The cage was built by rowe racing in Grand Island. The rear end is not a floater just a stock 9" coverted to fit the ltd frame. It has 6.00 gears with a ultra lite full spool. The engine is a 351 cleveland. The heads are closed chamber 4v heads with screw in studs and guide plates with manley racing valves. The motor has lite weight wiesco flat top pistons with total seal rings and childs and albert 6.2 long rods compression is about 10.8, The rotating assy has stock damper and 16 lb flywheel. The complete assy is balanced. The block has oil restrictors and an external oil line to feed the rear main directly from the pump, the oil pan is a canton 10qt rear sump circle track pan. The engine only has nine nites of racing on it. The trans is a tricked out t-5 that has very little rotating weight. The car runs and handles great you would just need to put new sheet metal on and go racing. I am asking 4800 or best offer if you have any questions call 308 380 9473 Jason Davis
Contact Information:
jason davis
Phone: (308)380-9473
|
|
|
|
