View Advertiser Index
|
Posted on 11/9/2007
|
Parts and Motor For Sale
400ci motor. 400 block, STD bore. JE (18 degree forged pistons) 9.010 deck height GM 5.940 powder metal rods,line honed, Scat lightened crank, internally balanced under (1850 bob weight), solid lifter custom ground cam shaft, cloyes true roller double roller chain, melling high volume pump, kevko pan, GM 186 casting heads, screw in studs and guide plates, bronz guides, Manley under cut valves, All the oil passages are drilled for more oil flow, oil galley plugs are tapped. Might sell it without the intake and heads,,Has 20 laps on it,, Complete $2200
7 Diamond forged flat tops 350+040 use with 6" rods $100
Eagle 4340 crank, 3500 stroke, $300
2 gm steel cranks $100
350 blocks, 4 bolt and 2 bolt, $100
350 4 bolt block , bored +060 but not honed yet, line bored , square decked,oil passages drilled, $500 will hone to fit your pistons.
487 casting heads, cleaned and checked, surfaced, new guides. 2.02 int, 1.6 exh, new springs, retainers and locks, bronz guides, pinned studs,$550
882 castings, surfaced, cut for 2.05 int and 1.6 exh. cut for screw in studs and guide plates,bronz guides, mild port work $275
1(new) Edelbrock RPM alumanium head, Part #6061 bare $400
set of 291 casting heads, complete stock ready to bolt on ,been setting on the shelf, $200
New Guide Plates, $10 a set
New 7/16 screw in studs, $15 set
New ARP cam lock bolts, $5 pkg
New JE wrist pins, part #927-2.750-15-51S, 130 grams, $100
New Diamond wrist pins, 927-2.850 tappered ends, 140 grams $75
2 and 4 brl intakes, cleaned and crack checked, checked for straightness, $50
(SOLD)Pete Jackson gear drive $50
583 gears used good shape 28 or 31 spline $225
Sunnen rod hone $300
Misc stuff
Carrier shop furnace, used only 6 months, set up on propane has air conditioning coils, $200 like new
Redi heater uses kerosene $50 like new
turbo 400 trans, good shape $75
SOLD 4.3 litre V-6 rebuilt engine, long block, less than 500 miles on rebuild,pickup was hit in the back. hydraulic roller cam, asking $700 or best offer. SOLD
4.3 litre V-6, rebuilt short block, non roller cam, $500 or if you assemble it $300
I do trades also, let me know what you might want to trade.
Contact Information:
Terry Cohoon
Phone: (712)283-2283
Email: [email protected]
|
|
|
|
