View Advertiser Index
|
Posted on 11/9/2007
|
ENGINES/ PARTS FOR SALE
377 ENGINE
ALIGN HONED
DECKEDPLATE HONED
SQUARE DECKED
FULLY BALANCED
SPLAYED STEEL CAPS.
GIRDLE ON REAR MAIN.
4340 LW EAGLE CRANKSHAFT
4340 LW EAGLE 6.0 H-BEAMS C0NNECTING RODS W 7/16 ROD BOLTS
ROSS 13.8 PISTONS
8 QU. 6 GATE CRANKSCRAPER, WINDAGE TRAY OIL PAN
IRON EAGLE 215 CC. CYLINDER HEADS WITH 7/16 STUDS
ATI SUPER DAMPER BALANCER
COMP ROLLER CAMSHAFT
CRANE STEEL ROLLER TAPPETS WITH HORIZONTAL LOCKING BAR
COMP ROLLER ROCKERS
STUD GIRDLE
SUPER VICTOR INTAKE
BRODIX ALUMINIM VALVE COVERS.
Engine was on dyno 546 hp 519 ft/lbs. torque have dyno sheets
PRICE; $6000.00/firm
350 shortblock $1200
Rods- 6� scat pro series 4340 7/16 bolt
Pistons- H104CP .240 dome
Crank- GM steel 1148
Cam- Isky 547B
Pan- claimer race pan
Dart iron eagle heads $600
215 runners
2.050/1.600 valves
64cc
3/8 screw in studs with guide plates
Set of Scorpion Alum.1.5 roller rockers $150
3/8 stud w/ polylock only ran one night
Set of Crower 1.6 $175
roller rockers 7/16 stud
Set of 1.5 alum. roller $135
rockers 3/8 stud like new
11- partial set of alum roller $50
rockers 1.5 3/8 stud
10- L2304 TRW forged .030 pistons $200
on GM rod w/ good bolts
6- 6� wheeler rods $55
7- L3022F TRW forged .030 on GM rods $90
1-edelbrock performer #2101 $75
no porting
1-edelbrock #2999 1� extra tall $120
no porting
1- victor jr never ran just bolted $150
on no porting #2975
1- super victor like new #2925 $150
no porting
1-victor jr no porting #2970 $125
1- team g #7530 $60
have had some porting done
has had been welded up
in corner but not into any water
Kevco 8qt. modified oil pan $75
never ran just bolted on
2- sure seal air cleaner $5/each
spacers �� tall never used
19� 6 blade fan (steel) like new $10
Contact Information:
Jed or Tim Bengard
Phone: (712)268-2746 or (712)-268-2745
Email: [email protected]
Contact Information:
Tim Bengard
Phone: (712)268-2745
Email: [email protected]
|
|
|
|
