View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
Wiseco pistons, 350 + 030, uses 6" rods and a 3.625 stroke makes a 370ci motor. $250
7 Diamond forged flat tops 350+040 use with 6" rods $100
6 SRP forged flat tops, 350+040 for use with a 6" rod $75
5 Wiseco pistons, 6018A3 400+030 uses 6" rods and a 3.750 stroke $75
I have singles,pairs and mutiples of assorted pistons. Forged and hyperutectic, new and used. call or email and I will see if i have what you need.
Eagle 4340 crank, 3500 stroke, $300
BRC 4340 3.625 stroke $500
400 block, prebored to 4.180, square decked and line bored with main studs. Has bottom 1" hard blocked. oil passages drilled, coolant passages opened up. With all the machine work done to this block it normally sells for $700. But it has some slight shadows that didnt clean in the cylinders right at the very top. So I will sell it for $300
487 casting heads, cleaned and checked, surfaced, new guides. 2.02 int, 1.6 exh, new springs, retainers and locks, bronz guides, pinned studs,$550
991 heads, cleaned and checked, surfaced, new guides and pinned studs. 1.94 int./ 1.6 exh. $375
New World product/Motown heads, 205 int, 1.6 exh, 64cc chambers, angle plug, $550 bare or complete $800
Several new cams, stock car and hobby stocks, $100
several used cams with lifters in correct order for $50
New Guide Plates, $10 a set
2 and 4 brl intakes, cleaned and crack checked, checked for straightness, $50
583 gears used good shape 28 or 31 spline $225
Misc stuff
Carrier shop furnace, used only 6 months, set up on propane has air conditioning coils, $200 like new
Redi heater uses kerosene $75 like new
Uniroyale tires 235xR75x15 75% $40
turbo 400 trans, good shape $100
tool box with tools for use in pits $100
Sunnen Rod hone $500
Contact Information:
Terry Cohoon
Phone: (712)283-2283
Email: [email protected]
|
|
|
|
