View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
Wiseco pistons,370ci (6021A3) 350 +030 domed piston uses a 6" rods and a 3.625 stroke $225
New TRW forged domed pistons. 360ci L2510/L2509 uses 6" rods and a 3.480 stroke crank. $400 last set left.
New Kieth Black hyperutectic flat top pistons, 358ci uses 6" rods and a 3.480 stroke $200
4340 forged crank, 3.500 stroke, $375
4340 BRC forged crank, 3.625 (3 5/8) stroke $600
GM forged crank, stroked to 3.550 small juornal $300
GM reconditioned rods $75
350. 4 bolt block prebored to 4.055, line bored, sqaure decked, oil passagers drilled, $400
400 block, prebored to 4.180, square decked and line bored with main studs. Has bottom 1" hard blocked. oil passages drilled, coolant passages opened up. With all the machine work done to this block it normally sells for $700. But it has some slight shadows that didnt clean in the cylinders. So I will sell it for $400
400 block, pre bored to 4.160 decked and line bored. oil passages drilled $500
Several 350 and 400 core blocks
triple disk clutch setup, used 1 season. not burnt up.$275
882 casting heads for sale, complete and ready to bolt on, new valves 1.94/1.5, surfaced, new springs,new guides, $250 991 heads, 2.02 int/1.6 exh. , new guides,pinned studs, new springs and locks, $375
290 heads complete $250
461 heads angle milled not sure how much $75
991 head cores $50 pr.
882 head cores $50 pr.
292 turbo angle plug head, has been repaired. $150
Turbo 400 trans, used but good shape, $150
Ford 3 speed top loader $75
Ford cleveland block and forged pistons, crank and rods, not assembled, heads also, $250
Ford 302 blocks, complete cores. $100
hobby stock manifolds $5 each
Metal shop cabinets that hang on the wall, $100 each
Various sizes of heater hose (whole lot) for $30
buckets full of bolts (mostly motor bolts) $5 each
360 degree swivel lift hoist. comes with 2 different arms, $200
I am needing to make room for some new machines and dont have enough storage space. So any reasonable offer may be accepted on any of the stuff I have for sale.I also have parts that are not listed,, please call if your looking for something specific.. I might have it .....
[email protected] or call 712-289-2211 or 712-363-0996
Contact Information:
Terry Cohoon
Phone: (712)289-2211
Email: [email protected]
|
|
|
|
