View Advertiser Index
|
Posted on 1/12/2016 2:26:07 PM
|
PARTS FOR SALE
Std. bore 350 ci motor. H345 pistons, gm. rods 10/10 cast crank new rv cam new rings and bearings
complete motor $1400
360ci short block speed pro h140cl pistons scat 6" rods gm. cast crank balanced Lunati cam $1500 or freshened for $2000 can make complete
377 short block flat top speed pro pistons Scat 5.7 rods Gm. steel crank balanced $1800 obo can make complete
358 ci stock car motor 4 bolt block bored and honed with torque plates, Line bored Square decked Weisco pistons Eagle 5.7 rods Scat crank king bearings gap less rings
custom ground camshaft EQ 350I legal heads roller rockers
edelbrock intake $5380
350+060 4 bolt block decked to 9.010 good line bore $600
400+040 block 4 bolt studded mains deck plugged and square decked was line bored and is still good flat top forged pistons, and Scat 6" no crankshaft $500 obo
997 heads cut to 64cc 1.94 int/ 1.6 exh under cut and back cut valves Lunati springs $700
EQ 350I heads complete ready to bolt on $1400
383 4340 gun drilled crankshaft, fresh grind $325
350+060 Keith black 214 pistons, domed for 6" rods $200
383 dished pistons $50
Several good used oil pans $25
roller rockers 7/16 studs 2 full sets and several odds and ends $50 on sets singles for $5-$10
400 manual flywheel $100
automatic flywheels $5-$10
misc rods call if your looking for some $5-$10
Lots of misc parts just call
Coleman 4000 watt generator works perfectly $250
welding table frame app 5x7 square tube frame work heavy duty $100
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
