View Advertiser Index
|
Posted on 12/8/2014 8:32:30 AM
|
PARTS
350 +060 4 bolt short block (no cam) mahle pistons Scat rods Gm fresh ground crank block is decked bored and honed with plates line bored file fit rings acl bearings fully balanced $1800 Can make it complete
350 block +040 2 bolt block Arp main studs 9.015 deck height $350
327/350 block +030 2 bolt block std (straight) deck height std line bore $250
350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded cam bearings installed oil passages drilled and tapped $350
400 block +030 decked cleaned and checked and decked $300
391 ci (400 +010) domed pistons for use with 6" rods and a 3.625 stroke crank like new $300
New pro comp 6" stock type bushed cap screw $125
Eagle 6" press fit recond $100
383-- 4340 gun drilled and lightned crank fresh grind
( checked for straightness and magged) $400
NEW EQ heads cut for stock car (with or without valves springs retainers)
441 heads 2.02 int 1.6 exh slight port work bare $200
Misc
(1) NEW set Super Trapp mufflers $100
(1) 100 lb regular propane tank $75
turbo 350 trans was good working trans when pulled $100
125 lbs of lead melted in 25 lb chunks $1.25 a lb
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
