View Advertiser Index
|
Posted on 3/14/2014 7:30:49 AM
|
Parts
IMCA stock car motor 360 4 bolt block square decked/ with plates line bored Scat Mahle fully balanced EQ heads $5500
350 splayed cap blocks I have them in (1)+040 (2)+060
they dont get any cheaper than this $500
350(std bore)4 bolt block decked to 9.010 not yet bored and honed will finish to your size $500
1 left) Stock type rotating assembly fresh ground 20/20 stock crank reconditioned 5.7 rods/w good bolts sivolite +060 utectic pistons comes with bearings and rings $400
JE 390ci (job # 637806) Chevy pistons forged domed 4.135 bore 1.187 c.h. (use 3.625 stroke/6" rod).043/.043/3mm 470grams 2nd poss combo is (349ci)=(3.250 stroke 6.200 rod) very little use $300
Ross 390ci (4032) (#7312) forged flat top 4.135 bore 4.190c.h. 3.625 stroke 5.7 rod or use a (5.850 rod and a 3.335 stroke to make a 358ci)very little use $400
KB #114 350 +060 hyperutectic pistons big domed for a 6" rod $200 really nice shape
New pro comp 6" stock type bushed cap screw $125
New EQ imca heads complete $1350
Bowtie heads complete $650
487 heads fresh surface, 2.02 intake and 1.6 exhaust new guides new valves new retainers and springs(600) lift screw in studs/guide plates complete $650
441 heads ported and pressure checked $150
Lead #25 chunks 6 total $1.25 lb
Lots of new parts in stock CALL
Lots of good used misc parts CALL
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
