View Advertiser Index
|
Posted on 1/22/2014 6:59:36 AM
|
new and used parts
www.jnjfab.com
NEW 604 crate carb .620 tall spacer. $110 shipped, $100 picked up. Pick up 8-10 rear wheel hp over a 1 inch super sucker spacer, more over some other spacers on the market.
NEW 604 crate carb, methanol. Built from a billet light weight holley by Jdr Performance. Ive personally chassis dyno several of these carbs to ensure they are ready to bolt on when sold. Ive compared to Willys, pro systems, Blp and Blake back to back on the chassis dyno last spring. This is a methanol crate carb specifically built for the 604. $1300 with bowl to log fittings. Bolt on and go. 5-6 lbs lighter than conventional carb, larger capacity bowls, bowls have drain plug, o ringed fittings into bowls.
New ultrashield HALO VS containment seats with cover shipped to you $550 each
NEW Bassett Beadlock wheels $115 each I need to order these in on a stocking order must pick up here.
NEW KSE tandem fuel pump, ps pump. $700
New black 99 monte carlo nose piece. $110 have 2.
6 new 10 inch wide. 5 on 5 black. 3 in back space Aero non bead locks and two 4 in back space beadlocks� all NEW in boxes. $500 all 8 wheels.
New camaro inner tie rods. $5 each have 3.
BSB double sided pinion mount. $25 with bolt and spacer.
Alum tall valve covers used. $40
NEW 12.7 to 1 steering box. No fittings or pitman arm. NEW. Fastest legal hobby stock box. $175 $20 core. Can ship these for $20.
NEW r2c performance cleanable air cleaners. 4x14. These are the sportsman series, replace wix, napa etc. $50 each
New r2c air cleaner base for holley hp carb. $80.oo
New 11.75 speedway .810 rear rotors. $20 each
NEW sbc valve springs 1.46 diameter 130/350#. NEW in box with ten degree new comp cams steel retainers and new locks. $95 all.
vortec Edelbrock Performer #2716 aluminum intake, IMCA spec intake. $100.
Accell plug wires. Hei 90 degree boots on ends. Black high temp ones with separators. $25
Used seats with cover. Have many NEW and used. $50 to $125
NEW Solid axles 31 spline. 31� and 28-30.5� cut to fit. $55 each
NEW gun drilled 31 spline axles. 29.5� and 31�. $ 90 each
Used solid 31 spline axle 32.5 $50 grand national tapered type
USED 31 spline solid axle 28.5 qty2 $50 grand national tapered type
New 15% reduction krc serpentine lower pulley R Lock. $20 .
IMCA mufflers 3 inch, new $20 pair
3 inch turn downs $20 pair new slot cut to fit over mufflers
Msd chips new 7000 7200 7600 7800 8000 $5 each
Used bilstien shocks all good no dents bent or junk. $75 each
7� 5050,2060,8060,6060,3050,3050,3050,3050,1060
9�4010,4010,4010,6010,5030,3030,3030,4040,4040,4040,4040,4040,1030fx
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
