View Advertiser Index
|
Posted on 11/9/2007
|
2002 Terminator Chassis
2002 Terminator Chassis Hobby Stock
All options were done including, Frame welds ground and rewelded, A-frame holes aligned, rear frame square tubed, and all mounts.
Afco springs, Bilstein shocks, New ball joints, offset crossshaft(pass side), tie rods, sleeves, center link idler arm. All bearings and bushings front and rear are new. 22gal fuel cell, Kirkey intermediate seat with side head rest, Simpson 5pt harness, Longacre switch panel and Batt disc., Autometer pro-comp gauges in Longacre panel, Autometer 5" tach w/recall, Aeroquip blue braided fuel line with all fittings, Narrowed Ford 9in. (the shortest one around)w/ drain and fill plugs, all new bearings and seals, 2 new moser axles, Custom Aluminum dash, 3-2" Aero Chrome wheels and 1-4" Aero Chrome wheel on car, plus 9 extra wheels and tires all Aero and Bassett. 355c.i. .040, 10/10 crank, 5.7 rod, ft pistons, 993 heads w 2.02/1.6, comp cam and lifters, kevko 7qt pan, Randy Weinhold Carb, 3sd Tranny, Blowproof bellhousing, slave cyl., Ron Davis radiator, Tilton clutch pedal/wilwood cyl. everything you need to go racing except gears(would consider sellin 6.20's with car).
Spare motor- 355c.i. Jr motorsports short block, .040, FT pistons, 487 heads, stock pan.
Everything on this car is IMCA legal and it is a very good car. It has never been bent and is in excellent shape, you won't find a better car for sale.
Would like to finish the 2004 season but money talks!
$8400. takes it all!!!!!!!!!!!!!
Contact Information:
Tom Clapper
Phone: (402)727-5749
Email: [email protected]
|
|
|
|
