 View Advertiser Index
|
Posted on 4/14/2012 11:20:51 AM
|
Parts
Scorpion race series roller rockers, 3/8 studs $100
Schnieder cam , NEW , 252/256, 535/540, CAM, LIFTERS, SPRINGS, all for $350
MWMS 2, cam used, $10 MWMS 3, used , $10
(ALL SOLD OUT) New stock diameter hardened steel retainers, $10 a set while supplies last.
New 6.125 Pro I-beam rods. $200
GM cast crank, was used in a street car, balanced to lite weight rods and pistons, $75
New piston rings, many sizes, cast/moly/ $15-$25 a set
I have many partial set of rings if you need a single cylinder ring set. $10 per cyl.
400 sbc STD sets of Federal mogual bimetal bearings, 340 oil grove $50 a set.
JE 391 CI Domed pistons, 4.135 bore(for use with a 6" rod and a 3.625 stroke crank) $275
Mixed set of 412 ci flat top pistons, same weight and compression heigth. 400 +030 use a 3.800 stroke crank and a 6" rod. 11 pistons total part of them are Lunati and the rest are Ross Good way to build cheap backup. $75
Kieth Black pistons , 350 +030,flat top, for a 5.7 rods good used set(2 new) $100
TRW forged flat top pistons, 350 +030, for a 5.7 rod, $50
New 383ci (350 +030) dished pistons, speed pro hyper. $150
400 2 bolt block, fresh line bore, square decked 9.00. virgin block that will clean at +010, main studs $400
350 4 bolt block. Line bored, square decked. .040 $350 or hone to fit your pistons for $400
World products 72cc heads new in the box. 2.02 intake, 1.6 exhaust. $550
World products 76cc 1.94 int/ 1.5 exh. complete with roller tipped rockers $550
MISC air over hydralic pump, works good just slow 50
Contact Information:
Terry Cohoon Phone: (712)449-5543 Email: [email protected]
|
|
|
|