View Advertiser Index
|
Posted on 11/19/2011 11:27:31 AM
|
a few parts for sale, dart heads, pistons, springs
Go here for pics of for sale items..
http://s642.photobucket.com/albums/uu150/jnjfab/parts%20for%20sale/
89 buick regal body, ready to install. Doors are skinned. With oversized oem alum hood you can cut down as needed. $550
Aluminum oem hoods with nice body lines, these are much stiffer after gutting than steel and are big so you can bow them as needed and cut them down. $125 each
2008 terminator stock car chassis. BARE chassis with all mounts. Has had some changes by me, its got same geometry as my old green car. JnJ Fab motor mounts, shock mounts, a arm mounts, cell mounts, door bars. Has fabbed floor. Was raced 3 nights before I got it and stripped it bare. Has Buick Regal body mounts on it and can sell with body. $1500 bare $2050.00 with body and aluminum hood.
lightweight terminator floater for stock car, 60 inches wide, winters/prc hubs, rotors, 31 spline gun drilled axles, very good shape total 10 nights on it.. jigged by jnjfab with adjustable lower mounts. $850 complete.
66 racing T shirts white with 66 logo on front and back etc. $15 shipped to you.
Cleaned and painted machine grey metric spindles $60 each speedway gets $87.95!
Dirty metric spindles $40 each
Cleaned metric lower a arms with oem bushings ball joints $60
Dirty metric lower a arms with oem bushings ball joints $45
Cleaned metric lower a arms no ball joints or bushings $75
Stock vortec valve covers $10
New Mr gasket ultra seal cork/rubber vortec valve cover gaskets $5 pair have 2 sets
CNC ported RHS heads done by HvH open stock car or awesome modified heads�. all new parts best you can get. Chassis dyno time only on these heads. I sold the motor I had them built for. 61cc/ 219cc runners after CNC 2.02/1.6 valves. Fereah hollow stem valves, tool steel lw retainers, 1.5 $200 valve springs, ten degree locks. $2500 complete $1500 BARE
7 qt claimer pan with pick up, single kick out. $50.00 fits metric
7 qt Kevco pan with pick up, single kick out. $60.00 fits metric
400 4 bolt block, cleaned and crack checked already� std bore. $300 FIRM
Dart 180cc 49cc Iron Eagle heads. Intake ports cleaned up and port matched some. Very good performance valve job. Heads are machined for vortec intake bolt pattern and old style. I used these to compare the spec IMCA vortec intake to the old style bolt pattern intake on the chassis dyno. FRESH straight from machine shop ready to bolt on. Manley race flo undercut lw valves, 10 degree locks and keepers. Springs are 140# and 340-360 open all test good and ready to run. $550
461 double hump heads, 2 nights since freshened with good perf valve job. Screw in studs, plates, big springs, stainless valves. READY to bolt on and go today. No porting. All good parts. $300
461 double hump head cores. $100 pair
462 double hump head cores $100 pair
NEW Pro/Race pro series race balancer, chrome, degree. SFI 18.1. NEW in package. ($229.99 from JR) Sell $100.00
Keith black .100 dome 383 pistons. 4.030 bore, on nice polished x rods, 4-6 nights old, childs albert moly rings. Nice package to put in your block. Balanced and with balance card. $250 all. This is rods, pistons and rings and balance card!!! Not a whole motor..
Quadra jet intake manifold. Modified plenum area thru 4- 3� holes gain of over 15 hp from weind 7547 proven on back to back dyno run by myself, no smoke and mirrors. $200 each. Pics on www.jnjfab.com in the for sale section.
Gm q jet intake manifolds. Un touched. #250 this is the cleanest oem casting available. Best flowing. $95 each
Roller tip rockers,1.5, 7/16 stud with tungsten balls for reduced heat! $70.00 complete set. 2 nights.
Roller rockers, red. 1.6 ratio 7/16 stud with locks, 1 night. $70
Roller tip rockers 7/16 stud, tungsten balls. 1 nights. 1.5-1.6 ratio. $70
487x hobby stock legal heads, pulled off motor ran 15 nights. Screw in non shouldered studs. $450.00
350 4 bolt block .030 now needs honed to .040. $200.00
New vortec cork and rubber valve cover gaskets. Awesome to glue to covers. $5 set
Sbc 350 head gaskets. Mr gasket black good for hobby, sportmod, stock builds. $5 a set
NEW never ran 400 harmonic balancer shelf worn only $10
400 oem crank $20
2 piece sbc timing cover, pan stays on and you can access timing chain to change cams etc. Like new dyno time only. $15 each have three
External balance plate for rear of crank for 400 or 383. $5 each have 3
sbc flat guide plates $5 a set have 4 sets
Plastic Howe carb storage tote!! $25 like new
Recall tach, pro form 5� NEW $75
Alum hoods off full sized cars big enough to cut down for any fwd body on stock car or old style! $125
used black simpson belts. 2010 date. $50
New Rjs blue belts 2010 date. $50
metric headers, 1.75 tube, with extensions on collectors 3� outlet $105.00 LIKE NEW>>> good shape
Rear motor mounts, steel afco, mid plate type mounts with tabs that sit on your mount. $15
Good Bilst shocks $65 each
7�4555, 1050, 2050, 4555, 3050, 3050,
9� 5030, 6020,
NEW bilst trailer worn only $90 each
7� 5030, 3050
9� 4010
Wade Cross rebuilt Bilst NEW builds $90 each
9� 6010, 6010, 5030, 4010
Wade Cross rebuilt used or shelf worn $75 each
7� 1060 high nitrogen pressure
9� 3010, 3010, 3020, 4010, 5030, 4010
swiveling 90 degree water neck with allen bolts $15
4 blade steel fan 18.5 inch. $15 each have 2
NEW metric poly matrix B compound brake pads, one wheel set used in a heat race. These are 120 a set. $80 here!!
Metric caliper brake pad spacers $10 pair
Full size caliper spacers $10 pair
Lw spring upper cups $10 pair
Throttle rod with heims and studs on ends. $10
Carter fuel pump with -8 fittings welded in. $50 3 nights old
Holley fuel pump. Chrome. 12-327-11 is the part number. 110gph $70 used 3 nights
9" used short narrow yoke. $15 each
4.71 3rd member, lw spool, lw ring gear, 31 spline. $250
5.67 3rd member lw spool, lw ring gear. 31sp $500
5.00 3rd member lw spool, lw ring gear, 31sp $500
Front springs. 1100, 1100,1150,1200,1290 5.5x9.5 springs. Just rated. $20 each
Rear spring 5x13 Afco 180# $20
Lw Ultra shield seat, with head rest, no pads. This is the formed seat with the holes in it. 16� $150.00
Longacre accu tech, 2 gauge panel, 2 5/8 water and oil, with lights and senders. $65.00
New 9� 3rd members $425 shipped to you in a storage tote. Mini spool up to 650 ratio. Add 75 for full lw spool, Add 100 for lw ring gear. Any yoke, any spline. Usually ships next day. Assembled with solid pinion spacer and shims, not crush collar. NEW NEW NEW NEW
New Gun drilled Axle. 31 spline. 29.5 long. $65.00 NEW
Chrome REAL wheels 3 inch offset. NEW in boxes $75 each Used no dings $60 each Used with dings $40 None of these are very dinged up I donate anything marginal to a few local teams. I have 10 new, 40 used approx.
kids cage kart $1500
olympic brand adjustable front and rear suspension
extra sides
spare front and rear wheel and tire
almost every gear ratio sprocket goes with it
extra tie rods and heim joints for tie rods
toe gauges made by jnjfab
sells with toe gauges, air gauge, fire suit, $100 speedway gear bag, some lead, some tools, some oil.
$1500 all
Its red with red cage, body is in great shape needs nothing to go racing. was just scaled and caster camber set and parked.
EMAIL Jeff [email protected]
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
