View Advertiser Index
|
Posted on 11/11/2011 11:27:13 PM
|
For Sale - Complete 383
Complete 383 c.i. � Intake to oil pan
$4500.00 OBO
Will run on engine stand with gauges prior to purchase if requested.
�All refreshed (New Brgs, Rings, Oil Pump, Head/Valve Job)
�13.0:1 +/- Compression (w/ 49/50 cc heads) Fully Balanced...
�Heads: Iron Eagle; 49 cc; 180 cc runners
o Completely gone through
o Screw-in-Rocker Studs (3/8�)
o Comp Cam Roller-tip Rockers (1.6)
o Poly-Lock �Cool Nuts�
o Valves: 2.02 / 1.6
o 3 angle Valve Job
o In/Ex Ports match ported
o ARP Head Bolts
�Pistons
o Wiseco Forged (K261A35) (0.035)
o 13.0:1 � 49-50cc
o Flat Top � Two Valve Relief
o 6.0 Rod
o Floated wrist pin
o Apprx wt w/ pin: 337 grams
�Cam (Custom Cams Inc.)
o Small Base
o Gross Lift: In � .543; Ex - .543
o Dur @ .050: In � 254; Ex � 254
o Lob Sep: 108 Deg
�Lifters: (Custom Cams Inc.)
o Solid Lifter w/ Oiling Hole
�Rods (Scat ICR6000)
o 4340 I Beam 6.00� Bushed
o Light weight
o ARP Wave-Loc Rod Bolts
�Crank: Eagle Cast-Steel crank
�Misc:
o New Stewart Warner Stage 3 Alum Water Pump; Short; high flow; 3/4� Brg; 5/8� Shaft
o Alum DBL groove pulleys
o Cast OE 4 bbl Quadra jet intake (Gutted Out)
o 7 qt oil pan w/ reusable gasket
o New Melling 55HV oil pump
o Cloyes double roller timing chain
o PMB (PB1012-ST) 6 1/4� Dia Harmonic Balancer
�Not Included: Carburetor, Starter, Fuel Pump, Distributer, Exhaust, etc.
Contact Information:
Shawn
Phone: (402)469-6797
Email: [email protected]
|
|
|
|
