 View Advertiser Index
|
Posted on 6/16/2011 9:49:37 AM
|
Parts/Misc
350 +030 2 bolt block, $300 machine work all done.
350 +040 4 bolt block, line bored, square decked with BHJ fixture, bored and honed with deck plates.$550
350 +040 splayed cap block, Line bored, cam bore has been done, square decked with BHJ fixture, Bored and honed with deck plates,oil passages drilled and tapped, cleaning tap run through all the bolt holes. $650
400 2 bolt block, cleaned and pressure checked, line bored, square decked with BHJ fixture, to a 9.010 deck hiegth $400 will bore and hone W/deck plates for $550
(3)400 4 bolt blocks standard bore. $250--300
Speed pro 383 hyperutectic pistons, for a 5.7 rod $50
GM vortec heads $250 complete big valves (1) Bowtie head, nice port work (bare )(FREE)
New 6" polished beam rods $75
400 small block chevy 4 speed flywheel $50
Sunnen piston knurler, excellant working condition $400
Lots of good used camshafts,, some used just a couple of nights some as low as $20
cabinets $50
riding lawn mowe 42" cut 16hp $300
NO REASONABLE OFFER REFUSED
Contact Information:
Terry Cohoon Phone: (712)449-5570 Email: [email protected]
|
|
|
|