View Advertiser Index
|
Posted on 6/8/2011 3:27:39 AM
|
355 / 383 For Sale Plus other misc parts...
Complete 355 c.i. � Intake to oil pan
$2200.00 or Make Offer
Will run on engine stand with gauges prior to purchase if requested.
�10.39:1 Compression (w/ 76 cc heads)Fully Balanced
�Heads (993 castings)
o Completely gone through
o Re-surfaced
o New Z28 Springs
o New Retainers & Keepers
o Screw-in-Rocker Studs (3/8�)
o Stamp Steel Rockers (1.5)
o New Valves: 2.02 / 1.6
o 3 angle Valve Job
o In/Ex Ports match ported
�Pistons
o Speed Pro Hypereutectic (H617P) (0.060)
o 12.2:1 � 64cc; 10.4 � 76cc
o .275 Dome
o 5.7 Rod
o Floated wrist pin
o Apprx wt w/ pin: 616 grams
�Cam (Ultradyne I4957)
o Gross Lift: In � .525; Ex - .540
o Dur @ .050: In � 247; Ex � 255
o Lob Sep: 106 Deg
�Rods
o Resized
o Polished & Shot Peened
�Misc:
o Alum Water Pump; Short; high flow; 3/4� Brg; 5/8� Shaft
o Alum DBL groove pulleys
o Alum OE Quadra jet intake (Gutted)
o 7 qt oil pan
o Cloyes double roller timing chain
o Small Dia Harmonic Balancer
o HV Melling Oil Pump
�Not Included: Carburetor, Starter, Fuel Pump, Distributer, Exhaust, etc.
Complete 383 c.i. � Intake to oil pan
$4950.00 or Make Offer
Will run on engine stand with gauges prior to purchase if requested.
�All refreshed (New Brgs, Rings, Oil Pump, Head/Valve Job)
�13.0:1 +/- Compression (w/ 49/50 cc heads) Fully Balanced...
�Heads: Iron Eagle; 49 cc; 180 cc runners
o Completely gone through
o Screw-in-Rocker Studs (3/8�)
o Comp Cam Roller-tip Rockers (1.6)
o Poly-Lock �Cool Nuts�
o Valves: 2.02 / 1.6
o 3 angle Valve Job
o In/Ex Ports match ported
o ARP Head Bolts
�Pistons
o Wiseco Forged (K261A35) (0.035)
o 13.0:1 � 49-50cc
o Flat Top � Two Valve Relief
o 6.0 Rod
o Floated wrist pin
o Apprx wt w/ pin: 337 grams
�Cam (Custom Cams Inc.)
o Small Base
o Gross Lift: In � .543; Ex - .543
o Dur @ .050: In � 254; Ex � 254
o Lob Sep: 108 Deg
�Lifters: (Custom Cams Inc.)
o Solid Lifter w/ Oiling Hole
�Rods (Scat ICR6000)
o 4340 I Beam 6.00� Bushed
o Light weight
o ARP Wave-Loc Rod Bolts
�Crank: Eagle Cast-Steel crank
�Misc:
o New Stewart Warner Stage 3 Alum Water Pump; Short; high flow; 3/4� Brg; 5/8� Shaft
o Alum DBL groove pulleys
o Cast OE 4 bbl Quadra jet intake (Gutted Out)
o 7 qt oil pan w/ reusable gasket
o New Melling 55HV oil pump
o Cloyes double roller timing chain
o PMB (PB1012-ST) 6 1/4� Dia Harmonic Balancer
�Not Included: Carburetor, Starter, Fuel Pump, Distributer, Exhaust, etc.
Other Parts:
�Metric frame stripped down with floor pan: Make Offer
�12 Bilstein shocks completely rebuilt & Dyno�d (30/60,30/50,40/10,40/40,etc.) Prefer to sell all together� $85/pc OBO
�Fluidampner : $75.00 OBO
�Crane Stud Girdle (3/8�): $150.00 OBO
�SS Roller Rockers 1.5/1.6 (Full Set of 8 & 8); 7/16� Stud: $200.00 OBO
�SS Roller Rockers 1.5 (qty:14); 3/8� Stud: $125.00 OBO
�Ford (Size) Roller Lifters (used in Chevy engine): $100.00 OBO
�Quartermaster 7.25 Rally Single Disk Clutch (Like New): $250.00 OBO
�New Set Wiseco Forged Flat Top Pistons (K261A35) 337 grams: $400.00 OBO
�Aluminum Racing Water Pump, Short, High Flow, 3/4� Brg, 5/8 Shaft: $55.00 OBO
Contact Information:
Shawn
Phone: (402)469-6797
Email: [email protected]
|
|
|
|
