View Advertiser Index
|
Posted on 11/11/2010 8:47:47 PM
|
GARAGE CLEANOUT!
1- Power steering hose (powercraft 71074 -NEW) $10
1- Fuel log with fittings $35
1- Full Spool $75
16- Quarts of Joe GIbbs Driven XP4 oil $80
1- 1" alum. air cleaner adapter $5
1- Distributor Cap with Accel HEI Supercoil $40
1 set - Stock center dump exhaust manifolds $10
1 set - Corvette center dump exhaust manifolds $50
1- CNC Slave cylinder $35
2- NEW 28 spline Minispools $15 ea. or both for $25
1- 1" 4 barrel alum carb adapter $10
3- Mr. Gasket 2 barrel alum carb adapters $10 ea.
2- Phenolic adjustable 1" carb adampter $40 ea.
1- Drive Shaft Hoop (Hobby/SC) - NEW $15
1- Return Line Fuel Pump (NEW Airtex 41216) $20
2- Metric Upper ball joints (NEW K5208) $6 ea.
1- 1" alum. Wheel spacer -NEW $12
1- 18" 6 blade fan $15
1- 383-400 balance plate $5
1- WIllwood 3/4" Master Cylinder $35
2 each - 9"ford stock axles, both sides. $10 ea.
1- Corvette Flywheel (13.5"), Pressure Plate, and Clutch Setup $125
1- Flexplate Safety Shield (automatic - PRC 48327) NEW $30
1- Edelbrock Torker II intake $85
1- Willwood Dial Brake Adjuster $35
1- CNC Hanging clutch pedal $45
1- set Plug wire heat shield boots (used) $5 all
1 set- Alum. Pullys, long, 25% red.(?) $60
1- Stewart stage 1 Water pump, long $50
1- Sub Belt (crotch) red NEW $5
1- Alum Shifter handles, blue, no rods $10
1- 14" drop base air cleaner $15
3 sets- Tall Valve Covers $20 ea. or all for $50
2- Stock flywheels
2- Stock clutches
6 sets- Stock Upper Metric A arms, both sides $15 ea. or $25/set
6- Stock metric steering boxes (not 605) $10 ea.
1- Stock bare 9"ford housing (no pumpkin) $20
1- 2 Barrel Intake (last 3 digits 260) $15
1- 2 Barrel Intake (last 3 digits 266) $15
1- 2 Barrel Intake (last 3 digits 268) $15
1- 2 Barrel Intake (last 3 digits 773) $15
1- 2 Barrel Intake (last 3 digits 313) $65
All items available starting Friday morning. Reasonable offers will be considered, especially if buying quantity. Only trades considered, would be for Pnumatic air car jack or for a set of Scales (both of which MUST work). please email all questions, and i'll get back to you. feel free to call if you'd like to look at the items. I should be around most of Sat. and Sun.. Located in Beatrice, NE
Contact Information:
Brian Langdale
Phone: (402)228-5861 days or (402)-806-3483
Email: [email protected]
|
|
|
|
