View Advertiser Index
|
Posted on 7/31/2010 10:26:53 PM
|
SBC BRODIX -18X HEADS W/ SHAFT SYSTEM
I have a freshly rebuilt pair of SBC Brodix 18 degree heads that were originally CNC by Weld Tech. These are the Brodix -18X wide port castings and have a fresh rebuilt T&D shaft system direct from T&D (1.70/1.60 ratios). Just need stand shims and stand bolts to make complete. Heads have a spread port exhaust and down injection nozzles that can be plugged if not needed.
They are the following:
265cc Intake Runners flow 370-375 cfm, 95cc Exhaust Runners, 56cc Chamber, 2.150 / 1.625 Manley Race Flow intake valves and Manley Severe Duty Stainless Valves 11/32 stems +.500 lengths, PSI Dual Springs (.800 Max Lift) w/ Super 7 Del West Titanium Retainers and steel locks. The springs and retainers are used (20 passes in a drag car) but check out fine, locks, seals, spring seats, and valves are brand new. Looking for $3500 OBO 402-616-7643 Nick
Contact Information:
NICK SMITHBERG
Phone: (402)616-7643
Email: [email protected]
|
|
|
|
